How to Charge a Canon Camera in 2021 [7 Easy Steps Guides]

(Last Updated On: October 29, 2021)

If you own a Canon camera and are wondering how to charge a Canon camera, then in this article, we will be discussing everything you need to know when charging the battery of your canon camera.

So without any further delay, let us discuss these steps in detail.

In this method, we will be discussing the step-by-step method to charge a canon camera through a USB port.

How to Charge a Canon Camera in 2021

These steps are listed below:

Step 1: Open your camera’s cover

Step 2: Slip in the battery.

Step 3: Connect the plug with the terminal

Step 4: Connect the other plug with the adapter 

Step 5: Turn on the camera 

Step 6: Wait for the indicator light to show up

Step 7: Detach the adapter from the socket

Look for a camera with a flip screen: 12 Best Canon Vlogging Camera With Flip Screen

Step 1: Open your camera’s cover

The first you need to do to charge your battery is to open your camera’s cover.

Step 2: Slip in the battery.

Once you have opened the cover, insert the battery while holding the lock and release it once the battery gets inside the camera.

Make sure to not place the battery in the wrong direction otherwise you won’t be able to lock it in the right position. 

Therefore, you need to be extra careful during this step. 

Next, what you need to do is bring the cover a bit lower while pressing it down. 

You need to do it while slipping in the switch to snap it back in its original place.

Camera under budget: 12 Best Vlogging Camera Under 300 for 2021

Step 3: Connect the plug with the terminal

With your camera being switched off, again open its cover. 

Grab the tiny plug which you have purchased separately. 

Next, attach the plug right into the terminal of your camera.

Step 4: Connect the other plug with the adapter 

This step is quite similar to the third step of this method. 

Here, what you need to do is pick the bigger plug and insert it directly into the power adapter.

Step 5: Turn on the camera 

The fifth step may vary based on the model of your canon camera that you are using. 

Therefore, you need to check your Canon model and follow this step accordingly.

For your convenience, I have divided this step into two different parts.

The first part of this method will remain the same.

Therefore, it does not matter which canon model you are using as this step will remain the same.

The second step, however, is optional for some canon models. 

You need to check the specs of your camera and opt for the second step accordingly.

Flip over the plug and insert the adapter into a working socket.

For some Canon models, you can follow the next step or skip it and come right to the sixth step. 

Insert the main power cable into the adapter. Next, insert the remaining end into a socket.

Top action camera: 12 Best 4k Action Camera Under 100

Step 6: Wait for the indicator light to show up

By the end of the fifth step, your camera would begin charging. 

The lamp will light up once your camera starts to charge. 

Similarly, the lamp will turn off once it is fully charged.

Step 7: Detach the adapter from the socket

Once the lamp turns off and your camera is completely charged, detach the adapter from the socket. 

Next, remove the cable that’s connected to the camera.

Using a computer system for charging a battery pack

Another great way to charge the battery is through a computer. 

For this, all you need to do is follow the first four steps that we have shared above and insert the bigger plug of the cable in your computer’s USB port. 

Therefore, it is better to invest in an Interface Cable separately that is specifically built for this purpose.

The indicator led will turn green and the entire charging process takes a minimum of 4-6 hours.

However, it may take extra time if you upload pictures from the camera to your computer.

Top flash: 8 Best Flash for Sony a6000 for 2021 | Reviews [Must Read]

Things to remember 

  • To preserve your camera’s battery life and make it last for a longer period, avoid charging it for a long time. 
  • Ideally, it is recommended to not charge it for more than an entire day.
  • If you want to charge another pair of batteries, make sure to detach the cable from your camera before changing the battery to charge your camera.
  • If you are using a canon camera for the first time and still don’t know how to use a new pair of batteries for your camera, you can head over to canon’s official site and check the details of your battery pack.
  • This will help you get a better idea about the proper charging time along with the playback and recording time.
  • When using a Canon camera, you can still have access to the pictures while it is still charging. 
  • For this, all you need to do is switch on the camera followed by the playback mode. 
  • However, bear in that it is not possible to take pictures from the camera while it is charging.
  • If the charging lamp is unable to be lit, reattach your interface cable.
  • Charged batteries tend to lose their potency with time, irrespective of the fact whether you have used them or not.  
  • Therefore, the best way to ensure that your battery pack is in working condition, change it right before using it. 
  • In most cases, you can use a conventional charging device to charge your battery pack. 
  • However, you need to make sure that the power source is at least 60 Hz). 
  • If you are in an area that has a different type of power outlet, then you can opt for a compatible adapter for your plug. 
  • Avoid using transformers that are available for traveling, as they can damage your battery pack.
Usman Mani

Leave a Comment